Coffee Machine Tutorial

Prompt

A 30-second capsule coffee machine installation and setup tutorial video.
0-2s, the opening title text reads: seedance capsule coffee machine installation and use tutorial
2-5s, Step 1: install the water tank, see [reference image 1]
Shot: medium shot, slight high angle. Position: back of the machine body. Action: align the water tank with the slot on the back of the body, push it straight down until it clicks into place. Requirement: clearly show the alignment between the tank's bottom clip and the body's slot, the transparent part of the tank showing the water level line.
Voiceover: "First, install the water tank."
5-9s, Step 2: install the drip tray, see [reference image 2]
Shot: close-up, front view. Position: front of the bottom of the body. Action: push the drip tray parallel into the rails at the bottom of the body until it fully seats at the bottom. Requirement: show the rail-alignment process, highlighting the smoothness of the sliding-in action.
Voiceover: "Next, align the tray with the bottom rails."
9-13s, Step 3: install the used-capsule collection box, see [reference image 3]
Shot: close-up, slight low angle. Position: the cavity beneath the drip tray. Action: align the collection box with the recess and push it in, flush with the drip tray. Requirement: show how the collection box fits with the body, confirming it is seated correctly.
Voiceover: "Then insert the capsule collection box."
13-18s, Step 4: first fill with water, see [reference image 4]
Shot: close-up, side view. Position: top / back water tank of the body. Action: open the tank lid, pour in clean water up to the MAX water level line, close the tank lid. Requirement: highlight the water level marking, the water pouring in clearly visible.
Voiceover: "Open the tank lid and pour in clean water. Be careful not to exceed the maximum water level line."
The image highlights the maximum water level line.
18-25s, Step 5: power on, see [reference image 5]
Shot: medium shot, front view. Position: front of the body. Action: plug in the power cord, press the power button, the indicator light changes from blinking to steady (preheating complete). Requirement: close-up of the power button and indicator-light state change, showing the process from waiting to ready.
Voiceover: "Connect the power and press the power button."
25-30s, Step 6: first rinse (no capsule), see [reference image 6]
Shot: medium to close-up, front-side view. Position: front of the body, cup under the spout. Action: without inserting a capsule, press the brew button directly, hot water flows out to rinse the lines, the water flows into the cup. Requirement: emphasize the "no capsule needed" prompt label, showing the whole rinse-water flow.
Voiceover: "Last step, the first rinse. No capsule needed, just press the brew button. Your coffee machine is now ready to use."